Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Fort Lauderdale?
A new residential gate installation in Fort Lauderdale typically runs between $2,400 and $7,800 for a standard single driveway gate with an automatic opener, while larger custom or double-leaf driveway gates range from $6,000 to $15,000+ depending on material, size, and operator choice. Plain steel tube gates sit at the lower end; ornamental aluminum or wrought-iron with a LiftMaster or FAAC operator lands mid-to-high range. These are real numbers from the Fort Lauderdale market as of 2026, and they include parts, labor, concrete footings, and the gate operator unless otherwise noted.
If you’re replacing an existing gate and keeping the posts, you’ll pay less. If we’re cutting into a fresh fence line, pouring new footings in Florida’s sandy soil, and running power, the total climbs. The best way to know your number in 10 minutes is to call (754) 354-7351 and describe what you have. Estimates are free, and the price you get is the price you sign, in writing, before any work starts.
Key takeaways:
- Most Fort Lauderdale single swing-gate installs land between $2,400 and $7,800 complete
- Double-leaf driveway gates run $6,000 to $15,000+
- The gate operator (motor and controls) accounts for roughly 30-40% of the total
- Fort Lauderdale’s salt air and high water table push material choice toward aluminum, galvanized steel, or powder-coated iron
- Permits are required in most Fort Lauderdale neighborhoods; we handle that paperwork as part of the job
- Portcullis Gate Repair Fort Lauderdale gives you a written price before work starts and backs every installation with the 365-Day Done Right Promise
Gate Installation Cost Breakdown (2026)
Here is what we actually quote in Fort Lauderdale, line by line. These are ranges we’ve written on real invoices since 2008, adjusted for current material and labor pricing.
| Line Item | Typical Range | Notes |
|---|---|---|
| Single swing gate, aluminum or steel tube | $900 – $2,200 | Material only, standard 10-12 ft leaf |
| Single swing gate, ornamental iron or aluminum | $1,800 – $4,500 | Decorative finials, rings, or custom picket pattern |
| Double-leaf driveway gate (pair) | $2,400 – $7,000 | Two matching leaves, 16-24 ft total opening |
| Concrete footings and post setting | $500 – $1,500 | Fort Lauderdale’s sandy soil usually means deeper footings than inland Florida; we dig 36-42 inches to get below the loose top layer |
| Gate operator (actuator arm, motor, control board) | $700 – $2,400 | Depends on brand and duty cycle; see note below |
| Keypad, intercom, or remote kit | $200 – $1,200 | Basic wireless keypad at the low end; full intercom/video entry at the high end |
| Photo-eye safety sensors and edge protection | $150 – $500 | Required by Florida code for automatic gates |
| Conduit, wiring, and electrical hookup | $400 – $1,200 | Distance from panel to gate drives this; a long driveway adds cost |
| Permit fees and inspection | $100 – $400 | City of Fort Lauderdale or Broward County depending on jurisdiction |
| Old gate removal and haul-off | $150 – $500 | We take the old gate, operator, and brackets; heavier iron gates cost more to haul |
On the operator: a basic Mighty Mule or Ghost Controls unit for a lightweight single gate runs $700 to $1,000. A mid-range Linear or LiftMaster swing operator with a battery backup lands $1,100 to $1,800. If you want a FAAC, BFT, or Viking hydraulic operator built for daily commercial-style cycling, budget $1,800 to $2,400. We service and install all nine of those brands, so the technician who shows up already knows the system on your property, not just the one on the truck.
What pushes the price up: custom widths, arched or radiused gates, driveway intercom systems, vehicle-loop detectors buried in the pavement, and any gate over about 14 feet that needs a heavier gauge to stop sagging in South Florida’s humidity. What brings it down: keeping your existing posts when they’re still plumb and solid, choosing a simple tube design, and using a keypad instead of an intercom.
For a more detailed walkthrough of what we install and the neighborhoods we serve, see our Gate Installation in Fort Lauderdale page.
What Affects Gate Installation Pricing in Fort Lauderdale
Six things move the number on a Fort Lauderdale gate quote more than anything else:
- Salt air and gate material choice. Fort Lauderdale sits right on the Atlantic, and that salt spray eats untreated steel. We recommend aluminum or powder-coated/galvanized iron for anything within a mile of the Intracoastal. Aluminum costs a bit more than raw steel tube but you won’t be sanding rust blooms off the bottom rail in two years. It is the single best dollar you can spend on a coastal gate.
- Soil and footings. Most of Fort Lauderdale sits on sandy soil over a shallow water table. Footings need to go 36 to 42 inches deep and often wider than you’d need in, say, Ocala. In some neighborhoods near the New River or the canals, we hit water before 42 inches, which means a slightly bigger footing pour. It’s a small cost line but it matters for a gate that won’t lean after a season of afternoon downpours.
- Gate leaf count and width. A single 10-foot leaf is cheaper than two 8-foot leaves that meet in the middle. But a wide driveway (or an HOA requirement for a certain look) may force the double-leaf design. Wider leaves also need heavier frames and stronger hinges to avoid sag, which adds material cost.
- Operator duty cycle. A gate you open four times a day can run on a homeowner-grade operator. A gate that cycles 30 times a day because you have two cars, a teenager, and a pool guy needs a higher-duty unit like a LiftMaster, FAAC, or Viking. That is a $700 to $1,200 spread in the operator line alone.
- Safety sensor requirements. Florida building code requires photo-eye sensors and obstruction detection on automated gates. If we’re installing a gate where a vehicle or a child could be in the sweep path, we add edge sensors and a reversing loop. These are not optional add-ons in Broward County; they are code, and we include them in every quote rather than surprising you later.
- Permits and zoning. Fort Lauderdale requires a permit for most gate installations, especially anything automated. Some HOAs (Rio Vista, Victoria Park, Coral Ridge, Sailboat Bend) have their own architectural requirements on top of the city’s. We pull the permit, schedule the inspection, and handle the HOA submittal when needed. That administrative work is part of the price, not a hidden line.
How to Save on Gate Installation
You don’t have to overpay for a good gate in Fort Lauderdale. Here is what we tell our own neighbors:
- Keep your posts if they pass inspection. If the existing posts are set deep, not cracked, and still plumb, we can hang a new gate on them and save you $500 to $1,500 in demolition, new posts, and concrete. We always inspect first and we’ll tell you honestly if reusing them is a bad idea.
- Choose a standard-width gate. A 10-foot single or 16-foot double fits most Fort Lauderdale driveways. Custom widths mean custom cutting and more waste. Standard widths are cheaper to fabricate and cheaper to ship.
- Skip the intercom if a keypad works. A wireless keypad with a rolling code does the job for most homes. A full video intercom system is great, but it adds $600 to $1,200 to the quote. Add it later if you miss it; the wiring can usually be done after the fact without ripping out the gate.
- Ask about the 365-Day Done Right Promise. It doesn’t lower the first invoice, but it protects you from the second one. If something isn’t right inside the guarantee period, we come back and fix it at no charge. You’ll never pay twice for the same repair. That promise is written on every invoice we produce, not just mentioned in a brochure.
- Get the price in writing before you compare. Call (754) 354-7351 and ask for a written estimate. You’ll get the same number we’d hand you after standing in your driveway. No “well, it depends” when the technician arrives. The Kingswell Guarantee starts with a written price before any work starts, and that is not a negotiation we skip.
What Does a Fort Lauderdale Gate Installation Include?
When we install a gate in Fort Lauderdale, the written quote includes more than just the metal. Here is the standard scope on every install:
- Site visit and measurement. We check the driveway width, slope, post condition, power access, and soil. Fort Lauderdale driveways on the barrier island often have tight setbacks and thick landscaping, so we measure twice before ordering anything.
- Written estimate. The full price, line by line, in writing. You approve it before we order materials or schedule the crew. If we find something unexpected during the dig, we stop and talk to you before spending another dollar. No surprise invoice at the end.
- Permit pull and HOA submittal. We handle the City of Fort Lauderdale permit and any association paperwork. You don’t chase forms; we do.
- Footing excavation and concrete pour. Dug to code depth for Fort Lauderdale’s soil, with rebar and proper drainage. We let the concrete cure before hanging the gate so the posts don’t move on day three.
- Gate fabrication and hang. We order the gate to your spec, weld or bolt the hinges, and hang the leaf or leaves. The crew levels and swings the gate multiple times before they call it done.
- Operator installation and programming. The actuator arm, control board, keypad, and remotes. We program the travel limits, force sensitivity, auto-close timer, and any safety edges or photo-eyes.
- Safety sensor calibration. Florida code requires that the gate reverse when it meets resistance. We test this with a physical obstruction, not just a panel reading.
- Walkthrough and cleanup. We show you how the remote, keypad, and manual release work. We haul off the old gate, the packaging, the concrete bags, and the coffee cups. The job site is left cleaner than we found it. That’s part of The Kingswell Way.
- Written guarantee. Your invoice shows the install date and the 365-day guarantee term. If it fails inside that period, the return visit is free. That is the 365-Day Done Right Promise, and it is stamped on every Portcullis invoice.
Is Gate Installation in Fort Lauderdale Different From Other Florida Cities?
Yes, in a few ways that show up on the invoice. The salt air near the coast shortens the life of uncoated steel. The water table under much of the city means deeper footings and sometimes a sump-pump style drain detail around the post base to keep standing water off the hinge block. And Fort Lauderdale’s older neighborhoods, Victoria Park or Rio Vista, often have narrow driveways and utility easements that crowd the gate footprint, which can push us toward a Pedestrian Gate or sliding gate instead of a swing gate in a few cases.
Also, storm season matters. A gate that can’t be manually opened after a hurricane is a problem. We always install an accessible manual release, and we recommend battery backup on the operator so the gate still works when Florida Power & Light cuts out. That is a $200 to $400 add-on we suggest more often in Fort Lauderdale than in, say, Gainesville.
How Long Does Gate Installation Take in Fort Lauderdale?
Most single-gate installations take one to two working days after the concrete has cured. Here is the honest timeline:
- Day 1: Site visit, measurement, and written estimate. You’ll have a number within 24 hours of calling (754) 354-7351.
- Days 2-7: Permit processing and gate fabrication. Custom ornamental gates take longer; standard tube gates are quicker.
- Day 8 or 9: Footing excavation, forming, and pour.
- Day 12-14: Concrete has cured; we hang the gate and mount the operator. This is a one-day job for most standard installs.
- Day 14 or 15: Final safety calibration, walkthrough, and cleanup.
Wait, you might say, two weeks? Yes, and most of that is concrete curing time and permit queue. We don’t rush the cure; a gate hung on green concrete sags within the first year, and that sag is exactly the kind of failure we would rather prevent than repair. If you have an urgent need, call us and we can often move the schedule, but we will not shortcut the concrete.
How Much Does a Gate Operator Cost in Fort Lauderdale?
If you already have a gate and only need the operator, the actuator and control board swapped, the Fort Lauderdale market runs $700 to $2,400 parts and labor depending on brand and duty cycle. Here is the breakdown we quote:
- Mighty Mule or Ghost Controls (homeowner duty): $700 – $1,000 installed
- Linear or LiftMaster (residential-heavy duty): $1,100 – $1,800 installed
- FAAC, BFT, Viking, or DoorKing (commercial-grade): $1,800 – $2,400 installed
The actuator, which is the motorized arm that physically pushes the gate open, is the part that fails most often in Fort Lauderdale’s humidity and salt air. If your gate struggles to open after a rainstorm or makes a grinding sound, the actuator is usually the culprit. We replace the operator with the same brand whenever possible, and we always verify the safety sensors before we leave.
How Much Does Gate Repair Cost in Fort Lauderdale?
For context, most gate repairs in Fort Lauderdale run $150 to $850. A simple hinge replacement or sensor realignment sits at the low end. A full actuator swap or control-board replacement sits at the high end. If your gate isn’t moving and you need a repair rather than a full installation, call us. We answer the phone 24/7, and we’ll give you a written price before we touch the gate. The home page has more on our repair services and coverage area.
FAQs – Gate Installation Cost
How much does a driveway gate cost in Fort Lauderdale?
A single driveway gate with an automatic opener in Fort Lauderdale typically costs $2,400 to $7,800 installed, including materials, labor, footings, operator, safety sensors, and permit. Double-leaf gates or ornamental designs run $6,000 to $15,000+. For an exact price, call (754) 354-7351 for a free written estimate.
Is it cheaper to repair or replace a gate?
If the gate frame is solid and only the operator, hinges, or a picket is damaged, repair is almost always cheaper. Most repairs run $150 to $850, while a full replacement starts around $2,400. The turning point is usually rust-through on the bottom rail or a sagging frame that can’t be squared; in coastal Fort Lauderdale, salt corrosion often pushes a 15-year-old gate toward replacement. We’ll tell you honestly which one makes sense for your gate, not our invoice.
Can you install a gate the same day in Fort Lauderdale?
Same-day emergency repairs, yes. A full installation, no because concrete must cure for about 7 days before we hang the gate. What we can do same-day is an emergency repair or temporary manual conversion to get your driveway secure tonight. Call (754) 354-7351 and a live person will answer, 24/7, and get a technician rolling.
Do I need a permit for a gate in Fort Lauderdale?
Yes, most automated gate installations in Fort Lauderdale require a permit from the city or Broward County. The permit line on our quotes runs $100 to $400. We pull the permit, schedule the inspection, and close out the paperwork. Some HOAs also require architectural review, and we handle that submittal as part of the job.
Why do Fort Lauderdale gates rust faster than inland gates?
Salt spray from the Atlantic and the Intracoastal accelerates corrosion on untreated steel, especially on the bottom rail and hinge blocks. That is why we recommend aluminum or powder-coated/galvanized iron for coastal homes. The material upgrade costs $200 to $900 on most gates, and it buys you an extra 5-10 years of clean operation in Fort Lauderdale’s salt air. It is a number we show on the quote rather than hiding it.
What does the 365-Day Done Right Promise cover on an installation?
Every Portcullis installation carries a written 365-day guarantee. If any part of the installation fails inside that year, the operator, the hinges, the sensor, the gate itself, we return and correct it at no charge. That free return visit is written on your invoice, not just promised over the phone. It is the same guarantee on every job, from a simple hinge replacement to a full custom gate install.
Why Fort Lauderdale Homeowners Choose Portcullis Gate Repair
Dean Prescott started this Portcullis location with a simple rule: write the price down, show up when you say you will, and come back if the work fails. That rule became the Kingswell Guarantee, and it hasn’t changed since 2008. Every Portcullis location is independently owned and operated, so you work with the people who live and work in Fort Lauderdale, not a call center three states away. But every location is bound to the same four written promises: a written price before work starts, a real arrival window, a clean job site, and a written guarantee on the repair.
We answer the phone with a live person, 24 hours a day, 7 days a week, including holidays. The technician who shows up is background-checked, uniformed, and trained across nine gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we don’t spend the first hour learning your system; we spend it fixing or installing it.
And if you’ve been burned by a gate company before, know this: the written price is the price. No adjustments at the door, no “we found more damage” upcharge routine. If we find something during the job, we stop and show you. You approve any change before we proceed. That is The Kingswell Way, and it’s been the standard here since 2008.
Get Your Fort Lauderdale Gate Installation Quote
You don’t have to guess what a gate costs. Call (754) 354-7351 and describe your driveway, your gate style, and whether you need an operator. We’ll give you a written estimate, line by line, free of charge. If you’d rather, we’ll schedule a site visit in Fort Lauderdale or any nearby Broward County community. The number we quote is the number you pay, and every installation carries the 365-Day Done Right Promise in writing.
Call (754) 354-7351 today and get the real price for your Fort Lauderdale gate installation.
Written by Dean Prescott, Owner at Portcullis Gate Repair Fort Lauderdale, serving Fort Lauderdale since 2008. Pricing reflects the Fort Lauderdale market as of 2026. Portcullis Gate Repair Fort Lauderdale offers free estimates – call (754) 354-7351.
What Our Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw