Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Fort Lauderdale Homeowners
A gate that won’t open, shudders on its track, or sags against the driveway is more than an inconvenience here in Fort Lauderdale. It’s a security gap, a daily frustration, and a problem that rarely fixes itself. Portcullis Gate Repair has served Fort Lauderdale since 2008, and we built our name on the Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every repair. Dean Prescott leads our Fort Lauderdale team, and every technician who shows up at your property is background-checked and uniformed. Call home base at (754) 354-7351 any time, day or night. A live person answers, not a recording.
Driveway Gate Repair
Automatic Gate Repair means restoring a gate that guards the entrance to your property so it opens, closes, and locks the way it should. In Fort Lauderdale, we see driveway gates fail from salt air corroding the hinges, from actuators burning out after years of daily cycles, and from vehicles clipping the gate itself. A typical swing-gate actuator swap runs $380 to $650 parts and labor. A hinge replacement on a standard steel driveway gate usually lands between $180 and $320. The written price you approve before we begin is the price you pay. Dean Prescott insists on that standard on every job.
Actuator Replacement
The actuator – the motorized arm that physically pushes the gate open – is the most common failure point on automated driveway gates. We diagnose whether the motor itself has failed or whether the issue is in the limit switch or the control board. Most actuator swaps take two to three hours on site.
Hinge and Track Work
When a driveway gate leans or drags, Gate Realignment or hinge and track work is almost always involved. We weld or replace hinges in place, and we re-level wheel assemblies so the gate rolls clean instead of grinding. Waiting on a leaning gate only makes the final repair more expensive.
Styles & brands we work with
Gate Welding
Gate Welding is the process of fusing metal components so a broken or aging gate is structurally sound again. It’s the fix for cracks, snapped hinges, rusted-through frame sections, and any break where a bolt or bracket won’t hold. In Fort Lauderdale’s humid, salt-laden air, weld points on uncoated steel fail faster than most homeowners expect. A typical crack repair and reinforcement runs $150 to $280. A broken hinge weld usually falls between $120 and $220. We quote every weld by the joint and the material, in writing, before striking an arc. Our Gate Repair in Fort Lauderdale work includes cleaning and priming every weld so rust doesn’t set in behind the repair.
Crack Repair and Reinforcement
Hairline cracks in gate frames spread under repeated load. We grind out the crack, weld it solid, and add a reinforcement plate when the original design is undersized for the gate’s weight. The repair is ground flush and the area primed the same visit.
Hinge and Bracket Welding
When a gate hinge snaps off the post or the frame, Hinge & Post Repair with welding is usually the fix. We weld the hinge back with proper penetration and alignment, then cycle the gate by hand to confirm it swings true. A rushed weld here shows up again within a year; ours carry the 365-Day Done Right Promise so it won’t.
Commercial Gate Repair
Commercial Gate Repair covers gates on apartment complexes, warehouses, parking structures, and industrial properties across Fort Lauderdale. These gates cycle hundreds of times a day, and they’re under code and insurance requirements that a house gate never faces. A standard commercial slide-gate wheel and track replacement typically runs $500 to $900 depending on gate length and access. Commercial actuator replacements run $700 to $1,400 for most brands we service, including LiftMaster, FAAC, and BFT. We schedule commercial work with a written scope and a real arrival window, because we know every hour that gate is down costs you something.
Slide Gate Systems
The wheel trucks, guide rollers, and chain drives on commercial slide gates in Fort Lauderdale take abuse from weather and constant use. We replace bearings, weld cracked frame sections, and align tracks so the gate doesn’t shimmy or jam. Every commercial slide gate repair includes a written post-repair checklist.
Access and Operator Repair
Commercial operators – the big boxes that move the gate – fail in predictable ways: capacitor burnout, limit switch drift, or board damage from power surges. We arrive with common OEM parts for DoorKing and Elite operators, so we can often complete the repair in one trip. Commercial properties in Fort Lauderdale also rely on us for safety edge and photo-eye compliance that keeps pedestrians safe.
Iron Gate Repair
Iron Gate Repair addresses the specific problems of ornamental iron gates found throughout Fort Lauderdale’s older neighborhoods like Victoria Park and Rio Vista. These gates are beautiful and heavy, and that weight is exactly what leads to sagging, cracked welds, and failed hinges. A typical iron gate hinge replacement with welding runs $180 to $340. Straightening and re-welding a bent iron picket usually lands between $120 and $250. We match the existing metal profile and finish so the repair doesn’t scream for attention.
Sagging Gate Correction
A sagging iron gate usually means worn hinge pins or a frame that has twisted under its own load. We replace the hinge assembly, weld any frame cracks, and reset the gate so it closes against the Lock Repair squarely. In Fort Lauderdale, an iron gate that sags in May will be dragging by August if it isn’t corrected.
Picket and Scroll Repair
Bent or broken iron pickets and decorative scrollwork weaken the whole gate and leave sharp edges exposed. We straighten what’s salvageable, weld what’s broken, and replace sections that are rusted through. The goal is an iron gate that looks like it belongs in Fort Lauderdale, not one that’s been patched and painted over.
Sliding Gate Repair
Sliding Gate Repair is for gates that roll horizontally along a track instead of swinging on hinges. They’re popular in Fort Lauderdale on narrow lots and driveways with a slope, because they never need clearance to swing. The trade-off is more moving parts at ground level: wheel trucks, guide rollers, track, and chain drives. A typical wheel truck replacement runs $220 to $380 per truck. A full track replacement on a standard residential slide gate lands between $400 and $800. Dania Beach and Ives Estates properties with canal-front lots see this repair often because the constant moisture accelerates wheel and track wear.
Wheel and Bearing Replacement
Slide gates ride on wheel trucks that flatten and seize over time. When a wheel bearing gives out, the gate jerks and strains the motor on every cycle. We replace the trucks and bearings as a set, then reset the guide rollers so the gate tracks straight.
Track Realignment and Repair
Fort Lauderdale’s sandy soil shifts, and with it, the concrete pad under a slide gate track. We cut and weld track sections, re-anchor the run, and regrade the base where necessary. A slide gate that scrapes the ground is burning out its operator, even if it still moves.
Wrought Iron Gate Repair
Wrought Iron Gate Repair focuses on the hand-forged style gates – the ones with tapered pickets, pass-through bars, and detailed scrollwork – that grace many Fort Lauderdale homes. Genuine wrought iron is scarce now; most gates sold as wrought iron are mild steel in the same style. Either way, the failure points are the same: rust, fatigue cracks, and hinge wear. A typical rust-through section repair runs $180 to $320. Scrollwork and picket replacement usually lands between $150 and $300 per section. In Wilton Manors and Lauderdale-by-the-Sea, salt mist from the Atlantic makes annual inspection a smart move.
Rust Treatment and Patch Welding
Rust doesn’t sleep in Fort Lauderdale’s humidity. We cut out rusted-through sections, weld in matching-profile steel, and treat the surrounding area with a rust converter before priming. A gate that’s only surface-rusted is a light repair. One with soft, flaking sections needs structural work.
Ornamental Detail Replacement
When scrollwork, collars, or finials crack and fall off, the gate loses both structure and its intended look. We fabricate replacements to match the existing pattern and weld them in place. Portcullis Gate Repair stands behind every weld with the 365-Day Done Right Promise, so a re-cracked joint is fixed at no charge.
Metal Gate Repair
Metal Gate Repair covers steel, aluminum, and mixed-metal gates, which make up the majority of gates in Fort Lauderdale’s suburban communities. Steel is strong but needs corrosion control. Aluminum is light and rust-resistant but bends and cracks more easily. A typical aluminum gate crack repair runs $160 to $280 with reinforcement. A steel gate post replacement – when the post has rusted through at ground level – runs $350 to $600 including concrete work in most Fort Lauderdale yards. We assess each metal gate’s alloy and coating before we spec the repair, because welding aluminum is a different job than welding steel.
Aluminum Gate Repair
Aluminum gates are everywhere in Lauderdale Lakes and Coconut Creek, and they fail most often at the corners of the frame. We TIG-weld aluminum cracks with appropriate filler rod and add gusset plates when the design allows. The repaired joint often ends up stronger than the original extrusion.
Steel Gate Repair and Post Replacement
Steel posts in coastal Fort Lauderdale rust first at the soil line, where water sits against the metal. We dig to expose the damage, cut and replace the post, and set it in fresh concrete. While we’re there, we check the hinge alignment so the gate doesn’t lean on the new post.
Wood Gate Repair
Wood Gate Repair is for the cedar, cypress, and pressure-treated pine gates found on many Fort Lauderdale properties, especially in Oakland Park and Broadview Park. Wood gates fail differently than metal: they rot, warp, and pull apart at the joints. A typical wood gate panel rebuild runs $280 to $450 depending on size and wood species. Replacing rotted posts runs $200 to $380 per post, including concrete. Fort Lauderdale’s wet summers and dry winters cycle wood through expansion and contraction every year, so a gate that’s tight in January will often bind by July.
Rot Repair and Panel Rebuild
We cut out rotted sections, scarf in matching lumber, and re-secure the gate with galvanized fasteners that won’t rust-stain the wood. When the panel is too far gone, we rebuild it to the original dimensions using the same species. Portcullis Gate Repair treats every wood repair with a paintable preservative before closing up.
Post and Hardware Replacement
A leaning wood gate is usually a post problem, not a panel problem. We replace posts at proper depth with drainage gravel at the base, then re-hang the gate on heavy-duty galvanized hinges. The hardware we supply is rated for Fort Lauderdale’s moisture, not for a dry-climate gate.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We send techs out with OEM parts and specific training on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others. Ghost Controls openers are common on residential swing gates in Fort Lauderdale’s newer subdivisions, and we stock their limit switches and remote receivers. DoorKing is the brand we see most on commercial and multi-family properties across Broward County; we’ve serviced their slide and swing operators for more than fifteen years.
Elite and Mighty Mule gates have their own quirks. Elite operators use a magnetic lock interface that’s easy to miswire, and Mighty Mule boards are sensitive to South Florida’s frequent power surges. When you call us, the technician already knows which diagram applies to your operator. Whether you have Ghost Controls, DoorKing, Elite, Mighty Mule, or any other make, we can help. One call to (754) 354-7351 gets you a live person, not a directory.
Signs You Need a Pro Right Now
- The gate reverses or reopens mid-cycle. This is often a safety sensor issue – photo eyes out of alignment or a failing edge sensor. It’s also a liability issue: a gate that reverses unpredictably can hit a car or a person. Shut the gate down and call us at (754) 354-7351.
- The gate grinds, shrieks, or vibrates as it moves. Grinding means metal-on-metal contact: a failing wheel bearing, a hinge that’s seized, or an operator gear stripped. Left alone, it destroys the motor, and a $300 bearing job becomes a $900 operator swap in Fort Lauderdale’s humidity.
- The gate sags or scrapes the driveway. Sagging tells you the frame is twisting or the hinges have worn beyond spec. Every cycle adds strain to the motor and the structure. A sagging gate is also an open invitation: a gap under the gate is a gap under your security.
- The remote works only sometimes or at very short range. That intermittent failure usually points to a failing receiver, antenna damage, or board corrosion from Fort Lauderdale’s salt air. We test the receiver, remote, and antenna as separate systems before recommending any repair.
- The open/close limits are off. When a gate stops short or overtravels against the post, the limit switches need attention. On automated gates, incorrect limits cause the operator to fight itself and burn out the capacitor. We set the limits and cycle-test the gate ten times before we leave.
Our Process, Step by Step
- 1
Call and talk to a person. You call (754) 354-7351 and a live human answers, day or night. We ask about the gate type, the operator brand, and what you’re seeing. We book a window that actually works for you.
- 2
Arrive and diagnose. Our uniformed tech arrives in the committed window. We test the gate manually, check the operator with a multimeter, and locate the failure. The diagnosis is explained in plain English – no mystery language.
- 3
Written price before any work. You get a written quote for parts and labor, and we do not start until you approve it. That’s the Kingswell Way: say the price before the work. No surprises at the end, ever.
- 4
Repair and test. We repair the gate, then cycle it repeatedly and check force settings, limit switches, and safety sensors. The job site is swept and the gate area left cleaner than we found it.
- 5
Written guarantee. Every repair is stamped with the 365-Day Done Right Promise on the invoice. If the fix fails inside that year, we come back and fix it again at no charge. You put nothing on a credit card and sign nothing extra.
How Much Does Gate Repair Cost in Fort Lauderdale?
Gate repair in Fort Lauderdale runs about $150 to $1,400 depending on what failed. Hinge replacements and small weld repairs land at $150 to $320. Actuator swaps on residential swing gates run $380 to $650. Slide-gate wheel and track work sits between $220 and $800. Commercial operators run higher, from $700 to $1,400 for most brands. The three things that move the price most are gate weight, access, and whether specialized parts like OEM boards are needed for your brand. The best way to avoid overpaying is to get the diagnosis before the repair and the price before the work. We don’t charge for the estimate, and we don’t sell you parts you don’t need. Call (754) 354-7351 for a free estimate – you’ll get a real dollar range before you even book the visit.
Our Service Area Near Fort Lauderdale
Portcullis Gate Repair serves Fort Lauderdale and the communities around it: Hollywood, Davie, Lauderhill, Coconut Creek, Lauderdale Lakes, Wilton Manors, Lauderdale-by-the-Sea, Ives Estates, Oakland Park, Broadview Park, and Dania Beach. We schedule across the county each day, so your repair window fits where you live, not where our shop is. For your neighbors, see Gate Repair in Hollywood and Gate Repair in Davie for specifics on those communities. Typical response in Fort Lauderdale proper is same-day for urgent repairs.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Fort Lauderdale
Gate repair includes diagnosis, replacement or welding of broken components, and testing of the full system, including the operator, safety sensors, and mechanical hardware. You get a written price before any work begins and a written 365-day guarantee on the completed repair. We do not charge for the estimate.
Most residential gate repairs in Fort Lauderdale are finished in two to four hours on site. A hinge replacement or crack weld often takes under two hours, while an actuator swap with limit-setting takes closer to four. If a part needs to be ordered for a specific brand, we tell you that before you pay for anything.
Gate repair in Fort Lauderdale typically costs between $150 and $1,400, depending on the specific failure. Small weld repairs run $150 to $300, actuator replacements $380 to $650, and commercial operators $700 to $1,400. Call (754) 354-7351 and we’ll give you a range for your specific gate before you schedule.
Yes, we service DoorKing operators across Fort Lauderdale and Broward County, and we stock common OEM parts for their slide and swing systems. We also carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. Whether it’s a DoorKing board or a Mighty Mule remote, we already know the wiring diagram.
Yes. We answer calls live 24 hours a day, 7 days a week, including holidays. When a gate is stuck open or closed in Fort Lauderdale, we can often have a tech on site the same day. Call (754) 354-7351 and you’ll speak to a person, not an answering service.
Every repair we make carries the 365-Day Done Right Promise, written on the invoice. If the repair fails within 365 days, we come back and fix it at no charge. That includes the second visit – you pay nothing for the return call on a covered repair.
Clear a couple of parking spaces near the gate so we can work, and if you have remotes or keypads, have them handy for testing. Secure any pets inside, and make sure the gate area is accessible. We’ll handle the rest – you don’t need to take anything off the hinges or unplug the operator.
Schedule Your Gate Repair Service in Fort Lauderdale Today
A gate that fails doesn’t wait, and neither should you. Call Portcullis Gate Repair at (754) 354-7351 for a free, no-obligation estimate on any gate repair in Fort Lauderdale. Our techs are background-checked, uniformed, and backed by the 365-Day Done Right Promise. We’re available 24/7, and we answer the phone – every time.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Fort Lauderdale since 2008.