Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Fort Lauderdale?
Gate access control installation in Fort Lauderdale typically costs between $2,800 and $7,500 for a complete residential system, with most single-family homes in neighborhoods like Victoria Park, Rio Vista, and Coral Ridge landing around $3,800 to $5,200 for a keypad-plus-telephone-entry setup on an existing swing or slide gate. That range includes the control board, keypad or card reader, power supply, wiring, and labor. Commercial systems in areas like Flagler Village or along Commercial Boulevard generally start at $6,000 and can reach $18,000 or more depending on the number of credential holders and whether you’re adding vehicle detection loops, cameras, or remote monitoring.
These are real numbers we quote on a weekly basis across Fort Lauderdale. They’re not the cheapest numbers you’ll find, and they’re not inflated either. They reflect what it actually takes to install a system that keeps working through salt air, afternoon thunderstorms, and the occasional hurricane-season power surge.
Gate Access Control Cost Breakdown (2026)
We’d rather give you the numbers up front than make you dig for them. Here’s what we see in the Fort Lauderdale market as of 2026, broken down by the most common jobs we’re called for.
| Component or Job | Typical Cost Range (Parts & Labor) |
|---|---|
| New keypad entry system (standalone, wired) | $850 – $1,600 |
| Telephone entry system (residential, single line) | $1,900 – $3,400 |
| Card reader or fob system (single gate, basic) | $1,200 – $2,400 |
| Vehicle detection loop (saw-cut, installed) | $1,000 – $1,800 per lane |
| Full access control board replacement | $1,400 – $2,800 |
| Complete residential system (keypad + telephone entry + control board) | $2,800 – $7,500 |
| Complete commercial system (multi-credential, loop, remote options) | $6,000 – $18,000+ |
| Service call (diagnostic visit, labor only) | $95 – $185 |
The spread in those ranges comes down to a handful of things. A gate in Rio Vista that’s 80 feet from the house needs a longer wire run than a gate 15 feet from the garage in Lauderdale Harbours. An older operator from the mid-2000s may need a retrofit board that costs more than a clean install on a newer LiftMaster or FAAC unit. And a property with a decorative masonry pillar at the gate means the keypad gets surface-mounted instead of post-mounted, which changes the labor.
Every quote we give is a written price before any work starts. That’s not a sales line. It’s a Kingswell Guarantee commitment that applies to every Portcullis Gate Repair location, including ours here in Fort Lauderdale. You’ll know the number before a single bolt comes off your gate.
What Affects Gate Access Control Pricing in Fort Lauderdale
Several factors push access control costs up or down in this market specifically. Some of them are obvious. A few are unique to South Florida and worth understanding before you collect quotes.
- Existing gate operator brand and age. We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some boards integrate cleanly with third-party access control. Others need an adapter or a full board swap to talk to a modern keypad. A 2010 Viking operator in Coral Ridge, for example, may need a $500 – $800 interface module before any access equipment goes on.
- Distance from gate to power and the house. Fort Lauderdale lots vary wildly. A 1950s home in Sailboat Bend might have the gate 200 feet from the panel, and the trenching and conduit alone can run $800 to $1,500. Newer construction in Shady Banks or along the New River tends to have shorter runs, which keeps labor down.
- Salt air and corrosion. This is a Fort Lauderdale cost driver nobody on a national pricing site will tell you about. Anything installed within a mile of the Intracoastal or the ocean needs marine-rated enclosures, stainless fasteners, and sealed connectors. Figure an extra 10 – 20% on hardware in places like Harbor Beach, Lauderdale Harbours, or the neighborhoods east of Federal Highway. Skip that step and you’ll be replacing rusted keypad boards inside 18 months.
- Hurricane code requirements. Broward County’s wind-load requirements affect how keypads, card readers, and call boxes get mounted on pillars and posts. Surface mounts need proper anchors, and any pedestal must be rated for the exposure. It adds labor hours, not just materials.
- Number of credentials and users. A simple keypad with 4 codes is a different job than a system managing 40 tenants in a small condo building off Las Olas. Multi-tenant systems need a database, sometimes a cellular link for remote management, and more programming time on site.
- Whether you want remote access from your phone. Wi-Fi and cellular bridges are common now. A system that lets you open the gate from an app, check an entry log, and add temporary codes for a contractor or Airbnb guest adds $400 to $1,200 depending on whether we’re adding a bridge to an existing board or integrating it into a new one.
The good news here: we quote the job once, in writing, and that’s the price. You won’t get a phone call after the board is open saying the wiring was “worse than expected.” The Kingswell Way means we say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
How to Save on Gate Access Control
Saving money on access control isn’t about finding the cheapest installer on a Craigslist ad. It’s about spending correctly the first time and not paying for features you’ll never use. Here’s what actually moves the number.
Buy the right features, not the feature list. Most single-family homes in Fort Lauderdale need a keypad with 4 to 8 codes and maybe a phone line or cellular bridge. A full commercial card-reader system with time-zone scheduling and 200-card capacity costs three times as much and mostly sits unused. We’ll tell you when less is enough. That’s part of the job.
Replace the board, not the whole operator. If your gate still opens and closes but the access control side is dead, you may only need a new control board or access module. That’s a $1,400 to $2,800 job instead of a $4,500 to $9,000 full operator replacement. We diagnose before we quote, and you get the written price before any work begins.
Do the trenching yourself only if you know what you’re doing. Some homeowners in Fort Lauderdale save $500 to $900 by digging their own trench for a power or data line. It’s honest labor and if you’re willing to do it, we’ll spec the depth and route. But don’t guess. You’re digging near irrigation lines, cable lines, and sometimes gas lines in older neighborhoods like Croissant Park. If you hit something, the savings vanish immediately.
Plan for the salt air now. The cheapest bid on a system near the water usually isn’t the cheapest over five years. Marine-rated enclosures and sealed connectors cost about 15% more up front and prevent hundreds in corrosion repairs later. We know which neighborhoods in Fort Lauderdale need this treatment, and we factor it into the quote so you’re comparing real numbers, not hopeful ones.
Get the free estimate. Portcullis Gate Repair Fort Lauderdale gives free estimates with a written price before any work starts. Call (754) 354-7351 and you’ll speak to a live person. Not a voicemail tree. Not a call center that promises to “have someone get back to you.” A person who can schedule a visit, answer questions about your specific operator, and put a real number in front of you.
FAQs – Gate Access Control Cost
How much does a gate keypad cost to install in Fort Lauderdale?
A wired gate keypad in Fort Lauderdale typically costs $850 to $1,600 installed, including the keypad unit, mounting hardware, wiring to the control board, and programming. Waterproof keypads for properties near the Intracoastal run at the higher end of that range. Call (754) 354-7351 for a written quote specific to your gate.
Is it cheaper to repair or replace a gate access control board?
Repairing a control board runs $250 to $600 on average when it’s a relay or connection issue. Replacement runs $1,400 to $2,800 installed. If your board is more than 10 years old and showing corrosion, replacement usually costs less over the next five years than repeated repairs. We’ll tell you honestly which side of that line your system falls on.
Can you install gate access control the same day?
In most cases, yes. If the wiring and operator are already in good shape, a basic keypad or card reader install takes 2 to 4 hours and we can usually schedule it inside the week, sometimes next day. Full system installs with trenching or multiple credential types take 1 to 2 days. Call (754) 354-7351 and we’ll give you a real arrival window before we leave the office.
How much does a telephone entry system cost for a single gate in Fort Lauderdale?
A residential telephone entry system for a single gate runs $1,900 to $3,400 installed in Fort Lauderdale. That includes the call box, control integration, and programming for up to 20 resident numbers. Homes in gated communities that need integration with an HOA-managed system may see additional programming fees from the association, which we’ll flag before you commit.
What does it cost to add phone app access to an existing gate?
Adding smartphone control to an existing gate costs $400 to $1,200 depending on whether your current control board supports a Wi-Fi or cellular bridge or needs a retrofit module first. LiftMaster and Ghost Controls boards from the last few years usually integrate cleanly. An older Elite or Viking board may need an additional interface. The written quote covers all of it.
Written by Dean Prescott, Owner at Portcullis Gate Repair Fort Lauderdale, serving Fort Lauderdale since 2008.
Pricing reflects the Fort Lauderdale market as of 2026. Portcullis Gate Repair Fort Lauderdale offers free estimates – call (754) 354-7351.
What Our Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick