Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Keypad & Intercom Repair: The Fort Lauderdale Owner’s Guide
DoorKing keypad and intercom repair in Fort Lauderdale typically runs $185 to $390 installed, depending on whether we’re replacing the keypad faceplate and membrane, rebuilding the intercom board, or swapping the entire call station. Most jobs are completed the same visit since our trucks carry the most common DoorKing parts for the 1500, 1600, 1800, and 9000 series. The way owners usually discover the failure is unglamorous: a delivery driver calls saying the gate won’t answer, or a guest texts “your keypad is just beeping at me.”
Here’s what else you should know before you order parts yourself or hire someone to show up. We’re the DoorKing-specific crew in Fort Lauderdale that will give you a written price before any work starts, not after the old unit is in pieces.
Key Takeaways
- Installed DoorKing keypad/intercom repair in Fort Lauderdale: $185 to $390 most common range
- We stock DoorKing 1500, 1600, 1800, and 9000 series keypads, faceplates, membranes, and intercom boards on the truck
- Same-day service is available in most Fort Lauderdale neighborhoods, from Victoria Park to Coral Ridge
- Every repair is covered by the 365-Day Done Right Promise, written on the invoice
- Portcullis Gate Repair Fort Lauderdale is an independent service company, not affiliated with DoorKing
Which DoorKing Models This Applies To
DoorKing has been building telephone entry and access control systems for decades, and in Fort Lauderdale we see a few model families more than any others. The 1500 series (1504, 1506, 1510) is the workhorse single-door phone entry system. The 1600 series adds the two-line intercom. The 1800 series handles multi-tenant applications. The 9000 series (9000-080, 9000-081) is the successor to the 1500 line, now showing up in newer Fort Lauderdale communities and getting repaired more often as coastal humidity works on the boards.
Here’s the compatibility gotcha that catches owners off guard: a DoorKing 1500 keypad faceplate will not drop into a 9000 series housing. The mounting posts, ribbon cable position, and membrane dimensions are all slightly different. Even within the 1500 series, an early 1504 from the late 1990s takes a different membrane than a 1510 built in 2010. We identify the exact part by the model label inside the housing and physical measurements of the keypad opening before ordering anything. On OEM versus aftermarket: DoorKing OEM membranes last longer because the UV-stabilized overlay holds up to Florida sun, but we install quality aftermarket replacements when an owner wants a tighter budget. We’ll quote both and explain the lifespan difference honestly.
Styles & brands we work with





Signs Your DoorKing Keypad & Intercom Repair Is Failing
- Keys 1, 4, and 7 stopped responding but the rest work. That’s a classic membrane column failure. The keypad membrane has conductive traces that share a single column circuit, and when that trace cracks, an entire vertical row goes dead. The board is usually fine; the membrane needs replacing.
- Visitors say the intercom sounds like static or “underwater.” In Fort Lauderdale, this is often corrosion on the intercom board’s audio circuit or a failing capacitor from constant heat and humidity. Sometimes cleaning and a component-level repair works; sometimes the board gets rebuilt with fresh audio-grade capacitors.
- The keypad beeps but the gate won’t open. You’re hearing the keypad register the digit press, but the relay that triggers the gate operator isn’t engaging. That’s typically a relay failure on the main board, and it’s a repair we handle, not a full board replacement.
- The display screen is fading, showing wrong characters, or completely dark. LCD degradation is accelerated by direct sun exposure, which puts Fort Lauderdale units at higher risk than the national average. A dim or garbled screen often means the LCD module needs replacing, not the entire unit.
- Water is visible inside the housing or behind the faceplate. DoorKing housings are weather-resistant, not waterproof, and South Florida rain driven by wind can seep past a compromised gasket. If water is getting in, the fix is a new gasket plus whatever electrical damage has already occurred.
Replacement Cost & What’s Included
Here’s the straight pricing for DoorKing keypad and intercom repair in Fort Lauderdale. A simple keypad membrane replacement runs $185 to $260 parts and labor. A keypad faceplate with membrane runs $240 to $310. Intercom board repair or component-level work runs $275 to $390. A complete call station swap, when the housing itself is damaged or the unit predates available parts, runs $520 to $680 installed.
| Repair Type | Typical Fort Lauderdale Installed Price |
|---|---|
| Keypad membrane replacement | $185 – $260 |
| Keypad faceplate with membrane | $240 – $310 |
| Intercom board repair / component rebuild | $275 – $390 |
| Complete call station swap | $520 – $680 |
Every quote is written, itemized, and agreed to before our technician turns a single screw. The part cost is broken out from the labor. You’ll know exactly what you’re paying, and the Kingswell Guarantee covers the repair for 365 days in writing. If the repair fails inside that year, we return and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s stamped on every invoice we hand over.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s an honest split here. An owner in Fort Lauderdale can safely open the DoorKing housing (with the power to the unit off at the breaker) and check for loose ribbon cables, a tripped GFCI at the outlet, or a corroded wire at the terminal block. Those visual checks are safe and can save you a service call if the problem is just a connector that worked loose.
Where DIY goes wrong is anything beyond look-but-don’t-touch. The DoorKing intercom board carries 16V AC, but the gate operator it connects to runs on 110V or 220V, and the wrong probe on the wrong terminal can damage the board and the operator. Component-level board repair requires soldering experience and the right capacitor values. Dean Prescott has spent nearly two decades on gates, and even he will tell you a board in hand beats a board in a YouTube tutorial. If you’re not sure what you’re looking at, call (754) 354-7351. We’ll tell you what we think it is over the phone and give you a written price before any work starts.
FAQs
A DoorKing keypad membrane typically lasts 5 to 7 years in Fort Lauderdale’s sun and humidity; the intercom board can last 8 to 12 years if the housing gasket stays intact and water stays out. Units on west-facing walls with no shade age faster.
It depends on what failed. A cracked membrane or worn keypad overlay needs replacement, but a faulty relay or a failing capacitor on the intercom board can often be repaired at the component level, which typically saves $75 to $150 versus a full board swap. We’ll tell you honestly which route makes sense after we open the unit.
Most keypad and membrane replacements in Fort Lauderdale take about 45 to 90 minutes on site. Intercom board work or a full call station swap usually runs 1.5 to 2 hours. We carry the common DoorKing parts on the truck, so the job is usually done on the first visit. Call (754) 354-7351 and we’ll give you a real arrival window.
We stock DoorKing 1500, 1600, 1800, and 9000 series keypads, membranes, faceplates, and intercom board components on our trucks, plus compatible parts for LiftMaster, Mighty Mule, and Ghost Controls. You don’t need to order anything in advance; we arrive with what’s needed for most repairs.
Call Portcullis Gate Repair Fort Lauderdale
If your DoorKing keypad or intercom is acting up, call (754) 354-7351. A live person answers around the clock, including holidays, and that’s not a voicemail tree, it’s one of us. We’ll schedule a technician, show up in the window we gave you, and hand you a written price before any work begins. That’s the Kingswell Way, and it applies to every job we do in Fort Lauderdale.
A written price first, then the work – that’s how we do it.
Written by Dean Prescott, Owner, Portcullis Gate Repair Fort Lauderdale at Portcullis Gate Repair Fort Lauderdale, serving Fort Lauderdale and nearby areas.