Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Wilton Manors, FL
Wilton Manors gates take a beating from the Atlantic air, and the repair calls we run here reflect it. Salt-laden breeze off the ocean and south Florida’s humidity work on metal hardware year-round, so rusted hinges, pitted rails, and gates that won’t close square are the norm in this city rather than the exception. Portcullis Gate Repair handles all of it, with a written price before any work starts and a live person answering at (754) 354-7351 when your gate won’t budge at 8 p.m.
Why Wilton Manors Homes Are Different
Wilton Manors is dense, walkable, and older than most of Broward County. The housing stock runs heavily to 1950s through 1970s single-family homes, duplexes, and small condo buildings, and a lot of them still have the original ornamental gate hanging off the fence line. Those mid-century driveway gates were built well, but they were not built for forty years of salt air. Hinges pit and seize. Steel posts rust from the inside at the concrete line. Aluminum pedestrian gates corrode around the rivets so the panel goes soft and sags.
The other thing about Wilton Manors is the lot geometry. Many homes sit on narrow side yards where the pedestrian gate runs through a 36-inch opening with 1960s post spacing that modern hardware doesn’t fit. Standard big-box hinge sets line up wrong, so a proper fix means either retrofitting the post or using custom-fabricated hardware. We see it regularly. The climate does the damage; the home’s age dictates the fix.
Styles & brands we work with
Our Main Wilton Manors Services
The three services Wilton Manors homeowners call us for most are gate repair, new gate installation, and electric gate repair. Each has its own detailed page below.
Gate Repair in Wilton Manors
Repair work here usually means a sagging gate, a hinge or wheel failure, or a latch that no longer catches. On older homes it often turns into a hardware job, replacing rusted internals with components matched to the original post spacing. Wilton Manors gates need repair before a squeak becomes a fallen panel, and we quote every job in writing before any work starts. Full details are on our Gate Repair in Wilton Manors page.
Gate Installation in Wilton Manors
Installing a new gate in Wilton Manors means working around existing masonry, narrow side yards, and occasionally the limits of what the old fence posts can hold. We measure everything, spec the hardware to the opening and the storm load, and install with the home standards of the Kingswell Guarantee. For what a full install includes and costs, see our Gate Installation in Wilton Manors page.
Electric Gate Repair in Wilton Manors
Electric gates in Wilton Manors fail in three predictable ways: the opener, the safety loops, or the power to the operator. Salt air is unkind to control boards, and the humidity finds its way into junction boxes older homes have outside. Our techs carry boards, receivers, and loop detectors for major brands and diagnose the whole run from panel to operator. See Electric Gate Repair in Wilton Manors for more.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Wilton Manors
Our Wilton Manors trucks stock common parts for LiftMaster, Mighty Mule, FAAC, and BFT operators, so most repairs don’t wait on shipping. We service nine brands total. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Hinge replacement (standard pair) | $180 – $340 |
| Gate alignment and re-hang | $150 – $300 |
| Gate wheel or roller replacement | $120 – $250 |
| Latch or lock replacement | $95 – $220 |
| Welded corner brace repair | $200 – $400 |
| Swing gate actuator swap | $450 – $850 |
| Slide gate motor replacement | $600 – $1,100 |
| Control board replacement | $300 – $650 |
| Safety loop sensor repair | $200 – $450 |
| Full pedestrian gate install (basic) | $700 – $1,400 |
Wilton Manors pricing runs higher than inland Broward when custom fabrication is involved, which is common on 1960s narrow side-yard gates. The other driver is corrosion: a hinge job that breaks two seized bolts adds labor. Whatever the price is, you’ll see it in writing before we start, and it won’t change at the door.
Neighborhoods We Serve in Wilton Manors
We cover all of Wilton Manors, from the multi-family clusters near Wilton Drive to the single-family blocks east of Dixie Highway. Response time for the area is typically within a few hours for urgent repairs.
- Central Wilton Manors
- East Wilton Manors
- Westside
- Middle River Terrace
- Lake Ridge
Service Area – Cities Near Wilton Manors
Beyond Wilton Manors, our crews serve the surrounding Broward corridor. That includes Fort Lauderdale, FL, Hollywood, FL, Davie, FL, and Lauderhill, FL. If you’re just across a city line, call and we’ll confirm coverage.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wilton Manors
For urgent calls, same-day response is typical in Wilton Manors. A live person answers the phone 24/7, and we schedule a real arrival window when you book. If you can’t secure the gate, we treat it as a priority. Call (754) 354-7351.
Repairs and hardware swaps rarely require a permit. New installs with power runs or substantial post work can, depending on scope and city requirements. We’ll tell you on the estimate if yours needs one, and the price will be in writing before any work starts. Call (754) 354-7351 for specifics.
Yes. Many Wilton Manors communities and condo buildings have design standards for front-facing gates, and we install to those specs every week. Bring us the HOA or building requirements, and we’ll price the job to match them exactly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Hinge sheared off our heavy iron gate. They welded a new one on and it's sturdier than before. Showed up on time and cleaned the driveway after the welding."
- Rhonda Mikula"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad